Plan as early as the concept stage
Know the door system threshold profile
Know the final internal floor finish level and external level

1. Early Planning with Experts

Marlin experts liaise with you at the concept and early planning stages so that every detail is accounted for to make sure that everything is fully considered and nothing is overlooked.

2. FREE DOOR PROFILE SAMPLES

Marlin provides a free sample of the door system threshold profile for your planner and builder to work from.
By using the sample you will know exactly how to set the masonry at the correct height to support the threshold and achieve a low or flush appearance.

There’s nothing quite like having the actual threshold profile to work with.

3. SHOWROOM DEMONSTRATIONS

Visit the Marlin showroom to see a demonstration of all the elements required to achieve a low or flush threshold – you will see exactly how to prepare for the very best outcome.

On TV

Accessible Low & Flush Thresholds – Wheelchair & Disabled Access

Our low profile superslim frame low threshold bi-fold doors featured on Love Your Home & Garden With Alan Titchmarsh (Swindon episode)
broadcast on ITV on January 15th 2019

Watch the programme highlights in less than 2 minutes below

Low Threshold – SIPS House

Low Threshold – Stirling Road

Wheelchair Accessible – TV Featured

The builder needs to know the exact height and depth of the threshold profile in order to set the masonry at the right level and ensure there is enough support for the door. Knowing the depth of the threshold profile he will be able to accommodate for any overhang into the cavity area.

The builder will also be able to decide the correct size of damp proof membrane to go under the threshold profile and ensure that this is installed correctly to provide necessary damp protection.

So how does the builder know the exact height and depth of the threshold profile? Simple. Marlin provides a free sample of the chosen bi-fold or sliding door system threshold which allows the builder to work with a physical piece of the actual profile. The sample can be placed in the ground and worked with to fully understand the relationship between the height of masonry that will support the threshold and internal and external levels.

In order to achieve the desired threshold height it is vital to understand what the final levels will be on both sides of the door. The final floor finish level will dictate the masonry height on the external leaf of the building that is supporting the door.

The threshold incorporates a drainage system with an outlet on the outside face – the outlet cannot be blocked under any circumstances. As such, steps, paving flags or decking must approach the outside face of the threshold so as not to block off the outlet.

With a sample of the threshold profile on site the builder can work out the height of the masonry that will support the door threshold and the position of the threshold within the reveal area.

For new floors, the threshold profile sample will also help to establish the edge of the floor structure.

For existing floor structures, the threshold profile sample will help to understand if there is a positioning issue within the reveal area and is a guide to establishing any necessary modifications to existing timber joists and flooring particularly when installing a three or four track sliding doors.

Open In Bi-fold Doors

As explained above, a small threshold upstand is advised to accommodate small level inaccuracies but is also vital for open in bi fold doors to ensure that the panels will fully open.

This is very important for a number of operational reasons:

• To accommodate for minor level inaccuracies
• Prevent panels from binding on surface bumps
• Ensures unhindered, smooth and effortless operation
• Avoids dislodging panel sealing gaskets

The best way to ensure a fabulous seemless threshold is to talk to us.

The sooner the better.

Call 01535 603909 Today.

Allowing clearance under the panels is not usually necessary since most external levels finish lower than the drainage outlet on the outside face of the threshold.

SLIDING DOORS

The sliding and fixed panels do not overhang the outside faces of the threshold on the inside of the room so panel clearance is not required.

For this reason the final floor finish can be built up to the top of the threshold to achieve a flush finish.

However, as previously explained don’t forget about the connection detail between the finished floor level and the threshold and any level irregularities that can be usefully accommodated for by creating a small upstand detail.

The door framework is designed to drain water. It is vital that the drainage holes on the outside face of the threshold are not blocked by masonry, steps, paving flags or decking etc.

For materials that are close to or touching the threshold above the drainage outlet on an installation at ground level, make sure that adequate land drainage is in place. This can be a simple channel filled with a coarse aggregate or an ACO type drain – installed with careful planning this can be discretely hidden under external finishes.

For an installation onto a balcony area, make sure that an adequate drainage system is in place under any external materials that are close to or touching the threshold above the drainage outlet.

At the start of the project the builder needs to know the following important information:

The door system and design
Panel opening configuration
Threshold design
The target height for the threshold

The builder will create the new opening and lay masonry to support the threshold. The height and level accuracy of the masonry will dictate the height of the threshold in relation to the final floor finish.

With the final floor finish known and the threshold profile sample on site you can be confident in achieving the required threshold detail.

It is possible that the existing floor structure will need to be modified in order to accommodate the depth of the threshold profile.

This is usually the case for deep three and four track sliding door frames but can apply to other frames depending on the desired position of the frame within the building fabric.

Our showroom doors are displayed to indicate how to achieve a low or flush threshold and we are on hand to give building construction advice on how to achieve this for your project.

Please visit our showroom in Keighley, West Yorkshire for a full demonstration of a bi fold or sliding door that has been correctly installed into a low or flush threshold environment.

Our knowledgeable and friendly team of experts will explain everything you need to know in order to achieve the very best design, function and installation results.

Marlin have years of manufacturing and installation experience and are here to share this with you.

As soon as you have a concept please get in touch to discuss your project – we will guide you through the entire process, help you to avoid all of the common mistakes and ensure you achieve the best possible results.

If like us you want to achieve the seamless appearance of a low or flush door threshold then leave nothing to chance. Talk to Marlin today!
Call 01535 603909 or click here.